;){kind=link}
Among the most powerful and efficient powered mixers Mackie offers, the Mackie 808M powered mixer is designed to handle sound reinforcement amplification and mixing in small or large venues, businesses, conference rooms and outdoor settings. The mixer boasts an impressive 1200 Watts at 2 ohms from twin 600-watt FR Series high-current power amps. Featuring 8-balanced 1/4" TRS Phone inputs and 8-XLR inputs with Phantom power for condenser microphones. Each mic preamp features Mackie's patented VLZ technology resulting in high headroom and very low noise floor. The EMAC effects processor engine provides 32-bit effect processing. Effect algorithms include reverb, chorus, flanger, delay, phaser and more. Dual 9-band EQ's provide final frequency contouring on output.
Third Rock Music Center
513-843-5739
513-843-5739
Used Mackie 808M Powered Mixer
|
|
Low in store inventory, may be subject to change
| Conditional | |
| Quantity: | |
|
|
|
Add to Cart | |
Features
- 1,200 real watts @ 2 ohms from twin 600-watt FR Series High-Current power amps
- Power amps switchable as mains or mains plus monitors
- 8 mic/line channels with phantom power
- Dual line inputs on channels 7 and 8
- Inserts on channels 1-6
- Active 3-band EQ on each channel
- 2 separate 9-band, audiophile-quality graphic EQs -one on mains and one on monitors
- Level-setting control and LED on every PPM mixer channel make setting input levels a snap
- Mil-spec fiberglass circuit boards (instead of cheap phenolic) resist physical impact
- Amp routing switch assigns power amps to mains or mains and monitors
- Hefty 10,000f storage capacitors for high peak power reserves
- Massive toroidal transformer for high current output
- Mega-cool die-cast heat sink
For questions or help ordering, call: (513) 843-5739
Twin 600-watt FR Series High-Current power amps supply 1200 watts of power @ 2 ohms. The FR series amplifiers are the same found in their famed amplifier line. FR (Fast Recovery) technology prevents the distortion that may occur when clipping.
The internal EMAC effects processor engine provides 32-bit effects a including reverb, chorus, phaser, delay, flanger and more.
Twin 9 Band EQ's are provided to contour frequencies before the output stage.
The Power Amp Routing Switch provides the flexibility to power both Mains and Monitor speakers with the internal amplifier, or use an external amplifier to power Monitors.
High quality, balanced line and microphone inputs provide high gain and minimize noise. Standard VLZ mic preamps provide quiet, prestine audio signal.
Inserts on channels 1 through 6 provide signal routing options to external processors such as compressors, limiters, gates, external EQ's etc.
Injection-molded chassis and rugged components provide the durability needed for heavy mobile use.
1-Piece die-cast heat sink is custom-cast for maximum heat dissipation. Black coating improves efficiency by 15%.